Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Spring Replacement Cost in Tacoma?
Spring replacement in Tacoma typically costs $180 – $340 for one spring. That range covers the spring itself, the labor to wind and balance it, and the safety inspection that goes with any torsion or extension work. Most Tacoma doors use a matched pair, and since both springs on a pair are usually replaced together, a set usually runs about twice that range: $360 – $680. The written estimate you get on site sets the final price, and estimates are free.
If your door won’t lift, or you heard a loud snap from the garage, don’t force it. A door with a broken spring is carrying its full weight on the opener and cables, and running it that way can bend the tracks or burn out the motor. Call (844) 709-1359. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Same-day service is usually possible when you call before the afternoon.
Key Takeaways
- One spring: $180 – $340. A matched pair: about $360 – $680, since both are almost always replaced together.
- Torsion springs (the ones mounted on a shaft above the door) are the standard setup on most Tacoma doors. Extension springs, found on older doors, price out differently.
- Technicians have up to 15 years of experience, and springs are one of the few garage door jobs we treat as genuinely high-risk work.
- Your garage door is the largest moving entry point in the house. A dead spring doesn’t just cost you convenience; on a door with no working spring, the opener is pulling dead weight every time you press the button.
Spring Replacement Cost Breakdown (2026)
Here’s how spring pricing breaks down for the Tacoma market. These are typical estimated ranges as of 2026, not quotes. The written estimate is what counts.
| Item | Typical Estimated Range |
|---|---|
| One torsion spring, replaced | $180 – $340 |
| Matched pair of torsion springs | $360 – $680 |
| One extension spring, replaced | $180 – $340 |
| Spring replacement bundled with spring replacement check and door balance adjustment | Quoted per job |
| Cable repair, when a cable is worn or damaged alongside the spring | $130 – $250 |
| Roller replacement, when rollers are worn flat | $110 – $220 |
| Track realignment, if the door has been run on a broken spring | $120 – $240 |
| Opener repair, if a strained motor has failed | $120 – $320 |
| General garage door repair, covering mixed issues | $150 – $600 |
| Panel replacement, when a damaged section needs swapping | $250 – $500 |
Notice that spring replacement is only one line on that table. That’s deliberate. Most of the time the spring is the whole problem, but sometimes it isn’t. A door that’s been forced open against a broken spring can bend a track, flat-spot the rollers, or overload the opener. A technician who only does garage doors checks all of it in the same visit, so you’re not paying for two trips. We work on your brand too, whether that’s LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, or Raynor, so the parts match what’s already on your door rather than a proprietary swap.
What pushes the price toward the top of the range? Heavier doors, high-lift or unusually tall openings that need longer springs, paired springs replaced at once, and any cable or roller work that has to happen alongside. What keeps it near the bottom? A single standard spring on a typical single-car door, no cable damage, and rollers and tracks still in good shape.
What Affects Spring Replacement Pricing in Tacoma
- One spring or two. Torsion systems almost always use a matched pair, and replacing only one leaves you back on the phone when the other fails. A pair costs about twice the single-spring range because you’re paying for two springs and the labor to balance both.
- Spring type. Torsion springs sit on a shaft above the door and are the standard on most modern Tacoma homes. Extension springs run along the tracks on older doors. They’re a different part, a different install, and they price out differently.
- Door weight and size. A double-car insulated door needs heavier springs than a single-car uninsulated one. LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor all build doors and openers of different weights, and the spring has to match the actual door, not a generic guess.
- Cable condition. Cables and springs wear together. If a cable is frayed or has slipped off the drum, it needs replacing while the door is apart, and that’s a separate line item.
- Whether the door was forced. A door run on a dead spring can bend tracks or wear rollers. Those get caught during the same visit and quoted separately, so there are no surprises.
- Access and mounting. Low-headroom garages, unusually high ceilings, and doors mounted close to a wall all change how long the job takes.
One thing worth saying plainly: springs are under extreme tension. A torsion spring holds hundreds of pounds of force, and an extension spring that lets go can do real damage. This is not a DIY repair, and no reputable garage door specialist will tell you otherwise. The tools and training to wind a spring safely are exactly what you’re paying for, and a trained technician with the right equipment is the only safe way to do it.
How to Save on Spring Replacement
You won’t out-negotiate a spring, but you can keep the total bill down by acting on the right things and skipping the wrong ones.
- Fix it when you notice it. A door that’s slow, jerky, or heavier than usual is telling you something. Replacing a spring before it snaps avoids the bent-track and strained-opener problems that come with a forced door.
- Replace both springs together. This feels like spending more and is actually the cheaper move. Two springs installed at once means one visit instead of two, and you’re not paying labor twice within a few months.
- Ask for the estimate in writing before work starts. Estimates are free and the price is set per job by the written estimate, so you know exactly what you’re approving. Call (844) 709-1359 to set one up.
- Get the rollers and cables checked at the same time. If they’re near the end of their life, replacing them during a spring job saves a second callout.
- Don’t run the door on a broken spring “just to get out.” It’s the fastest way to turn a spring job into a spring, cable, and track job.
- Keep the opener tuned. A door that opens smoothly puts less strain on the motor, and the motor lasts longer.
If a spring has already failed and the door is stuck open or stuck shut, that’s an emergency situation, not a maintenance one. Call (844) 709-1359, and we’ll get someone out as soon as we can. We answer 24/7, and a call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm.
Can Spring Replacement Be Done the Same Day in Tacoma?
Yes, in most cases. Spring replacement is one of the more common jobs a garage door technician does, and a single-spring replacement on a standard door is often a one-visit job. We carry the springs and tools to handle it, so when you call early, same-day service is usually possible. Call (844) 709-1359 for a free estimate.
Which Springs Do Tacoma Doors Use?
Most modern Tacoma doors use torsion springs mounted on a shaft above the door. Older homes more often have extension springs running along the tracks. Either way, the spring has to match the door’s weight and size, which is why we check the door before quoting. We service every major brand, including LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. Call (844) 709-1359 and we’ll confirm what your door needs.
FAQs – Spring Replacement Cost
How much does spring replacement cost in Tacoma?
Spring replacement in Tacoma typically costs $180 – $340 for one spring, and about $360 – $680 for a matched pair, since both springs are almost always replaced together. The estimate is free and the written estimate sets the final price. Call (844) 709-1359 for an exact quote.
Is it cheaper to replace one spring or both?
Both is usually the cheaper total. Replacing one spring alone runs $180 – $340, but a second visit when the other spring fails adds another labor charge. Replacing the pair in one visit at roughly $360 – $680 costs less overall than two separate single-spring jobs. Call (844) 709-1359 for a free estimate.
Does a broken spring always mean a full replacement?
Yes, in nearly every case. A spring that has snapped, stretched, or lost tension can’t be repaired, only replaced, and the typical cost is $180 – $340 per spring. Since forcing a door on a dead spring can bend tracks and strain the opener, it’s worth replacing right away. Call (844) 709-1359 for an estimate.
Can you come today if my spring is broken?
Usually yes. Same-day service is typically possible when you call early. We answer 24/7, and a call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. Call (844) 709-1359 and we’ll give you a free estimate.
Why is spring replacement more expensive than other repairs?
It’s the hazard. A torsion spring holds hundreds of pounds of tension, so the job requires a trained technician with the right tools, and that’s reflected in the $180 – $340 range per spring. Cheaper work usually means a generalist. We only do garage doors, so every technician and every tool is built for the job. Call (844) 709-1359 for a free estimate.
What Happens When You Call
Tell us what the door is doing, and we’ll ask a few questions to narrow down whether it’s a spring, a cable, or the opener. Then we book a visit, and a garage door technician comes out and confirms what’s needed, quotes it in writing, and does the work. Estimates are free, so there’s no cost to find out what your door needs. Call (844) 709-1359.
We do this one trade and nothing else. Garage doors are the only thing we work on, which means when your spring goes, the person who shows up knows springs. Whether it’s Tacoma Garage Door Repair Pros that first comes to mind or you’re calling after a snap in the middle of the night, the number is the same. Reach out and we’ll get your door moving again.
Written by the team at Tacoma Garage Door Repair Pros.
Pricing reflects the Tacoma market as of 2026. Tacoma Garage Door Repair Pros offers free estimates – call (844) 709-1359.
What Our Customers Say
"Keypad stopped working, which I assumed meant a whole new system. It was the batteries and a reprogram. He charged me the minimum service call and told me how to do it myself next time."
- Oscar Martinez"Spring snapped at six in the morning with my car sealed inside and me due at work. Somebody was here by eight thirty and had it fixed that morning. Door's quieter now than it was before it broke."
- Gabriela Castillo"Logic board on a 15 year old opener. He was upfront that a new opener would cost less than the board plus labor, and he wasn't wrong. No pressure either way."
- Wade Barrett